Category 01

SEALXTREME® PLUS Active Leak Repair Kit

SGD 98.10

Description:

75 mm x 2.7 m SEALXTREME PLUS Active Leak Repair Kit seals active pressurised leak under 30 minutes. It stops leaks on pipe without the requirement of system shut down. The maximum pressure SEALXTREME PLUS Active Leak Repair Kit can seal is approximately 10 bar (150 psi) of live operating water pressure. This is a specially formulated wrap repair system that is durable and cost effective to seal pipe leaks with high industrial strength.

About the Product

SEALXTREME PLUS Active Leak Repair Kit seals active pressurised leak under 30 minutes. It stops leaks on pipe without the requirement of system shut down. The maximum pressure SEALXTREME PLUS Active Leak Repair Kit can seal is approximately 10 bar (150 psi) of live operating water pressure. This is a specially formulated wrap repair system that is durable and cost effective to seal pipe leaks with high industrial strength.

Features

• Perform active leak repair up to 10 bar (150 psi) pressure • No system shutdown required • Fix active leaks in less than 30 minutes • Hand applied • Works on both metal and non-metal pipes • Enhance chemical resistance • Repair and extend pipe life • Environmentally friendly, reduce carbon footprint

Technical Data

• Tensile Strength : 2482 bar • Lap Shear Strength : 62 bar • Flexural Strength : 1793 bar • Application Temperature : 0 °C to 65 °C • Dielectric Strength : 16,000 volts • Hardness : 85 Shore D • Service Temperature : -50 °C to 120 °C • Design Pressure : 28 bar

Application

• Safety first, wear appropriate protective gear. Gloves are a must • Knead the epoxy stick until 80% harden • Place the 80% cured epoxy stick beside the leak • Wrap the sealing tape on the epoxy stick • Gravitate the sealing tape and push the epoxy stick towards the leak • Continue wrapping the pipe with sealing tape until the leak stops • Dip the fiberglass repair tape in water for five seconds • Reinforce repair area with fiberglass repair tape • Polish the surface of fiberglass repair tape with water and rub in parallel direction with the pipe

Kit Contains

SMARTSTIC Underwater Epoxy Stick

QUIKCONTROL Fiberglass Repair Tape

Protective Gloves

ITEM CODE SALRK0309
SIZE 75 mm x 2.7 m
IMPA CODE 812367
HS CODE 39191099
PIPE DIAMETER (mm) PIPE DIAMETER (inch) KIT SIZE UP TO 4 bar (50 psi) QTY UP TO 4 bar KIT SIZE UP TO 10 bar (150 psi) QTY UP TO 10 bar
50 mm 2 inch 75 mm x 2.7 m 1 75 mm x 2.7 m 1
65 mm 2½ inch 75 mm x 2.7 m 1 75 mm x 2.7 m 1

1 review for SEALXTREME® PLUS Active Leak Repair Kit

There are no reviews yet.

Be the first to review “SEALXTREME® PLUS Active Leak Repair Kit”